Share This
 
Brands
 
Shopping Cart
0 items
 
Live Chat

Bagian Komputer


komang@0817357436/
flexi@03618431333
pin BB@2A484EF4balian.komputer

Silahkan Chat/Telp untuk info harga ter-Update.

Terima Kasih

 
 
Guest Statistics
Sedang Online : 1
Hari ini : 50
Minggu Ini : 138
Keseluruhan : 6500
 
JNE
AWB Number:


 

CCTV Alarm Security MC- 01

CCTV Alarm Security MC- 01
Click to enlarge
Price: Rp 120,000.00
Availability: In Stock
Model: CCTV Alarm Security MC- 01
Average Rating: Not Rated

Product Detail :
NT-MC0l wireless door magnet sensor is applied in various kind of security alarm systems. It is installed on the door or the window. While the door or the window is opened, the wireless door magnet sensor will send the radio signals to the security system for identifying.
Features
Work voltage: 12V(23A battery)
Operating frequency: 315MHz, 433.92MHz, customer-made frequency available
Transmit power: 10mW
Operating current6mA
Standby current (When at rest)5uA
Frequency bandwidth150KHz
Low power indication:≤8V
Alarming volume:≥30dB
Response time: 1.5S~3S
Working indication color: red
Trigger manner: When open or close a door or window
Signal transmitting range: 80m in the open area
Effective magnet sensing distance: 10mm~15mm
Applications
Various domestic security system
Various office security system
Other site security system
Connection definition
Refer to the chart above, PIN1 to PIN8 is the code address section, PIN9 to PIN12 is the defense area establishment section, PIN13 uses for to realize the wireless magnet door sensor and the wired port transformation.
A security system may be paired with many magnet door sensor
When a system need to match with many sensors, each sensor may establish 16 kind of coding conditions. Then the encoding address is the same, but data coding address is different.
Input port usage
The port is special for wire connection input, and it’s normally close (NC) in case the line system being cut , when in complex environment, it’s suggested to connect the wire magnet door sensor or to connect many wireless magnet door sensor to make sure trigger the security system.
Installation of wireless door sensor
This product is best to use the screw to be fixed, if really convenient to use screw, please use the sponge glue instead, but must certainly pay attention to the reliability of glue, Please also pay attention to the distance between the security system and the sensor, it’s better to be within 8m.
Usage notice
When the low power indication works, please promptly replace the battery.

 



Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

There are no additional images for this product.